mpr radial leaded metallized polypropylene film capacitors features ? self healing ? stable with frequency and temperature ? low esr ? good pulse current ratings applications ? general purpose ? switching power supplies ? ac applications ( not across the line) ? ballasts specifications operating temperature range -55c to +105c capacitance tolerance + 10% at 1 khz, 25c + 5% optional wvdc 250 400 630 vac 200 220 250 peak, ac voltage (50/60 hz) for t>+85c , the voltage must be decreased by 1.5% per c frequency (khz) c< 0.1uf 0.1uf5uf 1 0.1% 0.1% 0.1% 0.1% 0.1% dissipation factor (max) 25c 100 0.4% 0.7% 1.2% 1.8% 2.8% capacitance insulation resistance < 0.33 f 30000 m ? insulation resistance @25c (<70% rh)for 1 minute at 100vdc applied >0.33 f 10000 m ? x f 2000 hours, +85c with 125% of rated voltage capacitance change < 3% of initially measured value dissipation factor < 0.001 at 1khz and 25 c load life insulation resistance > 50% of maximum specified value 56 days at40c with 90 to 95%rh, +40c and no voltage applied capacitance change < 5% of initially measured value dissipation factor < 0.005 at 1khz and 25 c damp heat test insulation resistance > 50% of maximum specified value self inductance <1 nano-henry per mm of body length and lead length capacitance drift factor <0.5% after 2 years at 40c capacitance temperature coefficient -200 ppm/c, + 100ppm/c terminal to terminal dielectric strength 200% of rated vdc or vac applied for 10 seconds and 25c dielectric polypropylene construction metallized film coating flame retardant epoxy resin (ul94v0) leads lead free tinned copper leads l max 12 18.5 26 31 s+ 1.0 10 15 22.5 27.5 g max 1.5 1.5 1.5 1.5 d + 0.05 0.6 0.8 0.8 0.8
mpr metallized polypropylene epoxy dipped radial lead capacitance (f) ic part number dv/dt (v/ sec.) dims lxhxt (mm) s (mm) d (mm) 0.01 103mpr400k 350 13x9x5 10 0.6 0.01 103mpr630k 420 13x10x6 10 0.6 0.015 153mpr250k 220 13x9x5 10 0.6 0.015 153mpr400k 350 13x9.5x5 10 0.6 0.015 153mpr630k 420 13x11x7 10 0.6 0.022 223mpr250k 220 13x9x5 10 0.6 0.022 223mpr400k 350 13x10.5x5.5 10 0.6 0.022 223mpr630k 420 13x12.5x8.5 10 0.6 0.033 333mpr250k 220 13x9x5.5 10 0.6 0.033 333mpr400k 350 13x11x6.5 10 0.6 0.033 333mpr630k 400 18x11.5x7.5 15 0.8 0.047 473mpr250k 220 13x9.5x5.5 10 0.6 0.047 473mpr400k 350 13x11x7.5 10 0.6 0.047 473mpr630k 400 18x13.5x8.5 15 0.8 0.068 683MPR250K 220 13x10.5x6 10 0.6 0.068 683mpr400k 300 18x12x6.5 15 0.8 0.068 683mpr630k 400 18x15.5x9.5 15 0.8 0.1 104mpr250k 220 13x11x7 10 0.6 0.1 104mpr400k 300 18x12.5x7.5 15 0.8 capacitance (f) ic part number dv/dt (v/ sec.) dims lxhxt (mm) s (mm) d (mm) 0.1 104mpr630k 230 26x15x10 22.5 0.8 0.15 154mpr250k 200 18x11x7 15 0.8 0.15 154mpr400k 185 26x13x7.5 22.5 0.8 0.15 154mpr630k 230 26x17x11 22.5 0.8 0.22 224mpr250k 200 18x12.5x7.5 15 0.8 0.22 224mpr400k 165 26x14x8.5 22.5 0.8 0.22 224mpr630k 180 31x17.5x10.5 27.5 0.8 0.33 334mpr250k 200 18x13x8.5 15 0.8 0.33 334mpr400k 165 26x15x10 22.5 0.8 0.33 334mpr630k 180 31x21.5x13 27.5 0.8 0.47 474mpr250k 110 26x14x8.5 22.5 0.8 0.47 474mpr400k 150 31x16.5x10.5 27.5 0.8 0.47 474mpr630k 180 31x24.5x15.5 27.5 0.8 0.68 684mpr250k 115 26x15x9.5 22.5 0.8 1 105mpr250k 110 26x16x12 22.5 0.8 1 105mpr400k 150 31x22x15 27.5 0.8 1.5 155mpr250k 100 31x18x13 27.5 0.8 2.2 225mpr250k 100 31x21x15 27.5 0.8
|
